Faraday's Law (h1)
Scene Summary (h2)
- Simulation Play Area contains:
- (If single coil)
- a light bulb circuit with a 4 loop coil.
- a magnet located at the
[location]
of the Play Area,[proximity]
to the 4 loop coil.
- (If both coils)
- a light bulb circuit with a 2 loop and 4 loop coil.
- a magnet located at the
[location]
of the Play Area,[proximity]
to the 4 loop coil, and[proximity]
to the 2 loop coil.
- (If single coil)
- Move the magnet to play.
Play Area (h2)
Circuit (h3)
The lightbulb circuit has the following parts connected together with wires:
- (If single coil) a 4 loop coil
- (If both coils) 2 loop and 4 loop coils
- (If volt meter showing) a volt meter attached
The coils are open on the left and right, allowing the magnet to pass through.
(If field lines visible and single coil) From the magnet's position, a[field strength]
magnetic field is passing through the 4 loop coil.
(If field lines visible and both coils) From the magnet's position, a[field strength]
magnetic field is passing through the 4 loop coil, and a [field strength]
magnetic field is passing through the 2 loop coil.
- Checkbox: Connect volt meter to circuit
- Checkbox: Show field
- Checkbox: Add 2 loop coil to circuit
Magnet (h3)
The magnet is at the [ location ]
of the Play Area.
(If first time focusing magnet) Use the W A S D keys to move the magnet. Number 1, 2, or 3 keys to slide the magnet.
(If single coil) The magnet is [proximity]
to the 4 loop coil.
(if both coils) The magnet is [ proximity ]
to the 4-loop coil, and is [ proximity ]
to the 2-loop coil.
(if field lines hidden) The magnet has two magnetic poles: North on the [left / right]
, South on the [right / left]
.
(if field lines visible) The magnetic field lines are going from North pole on [left / right]
end, to South pole on [right / left]
end of magnet.
Button: flip magnetic poles