Faraday's Law (h1)
Scene Summary (h2)
Faraday's Law is an interactive sim. It changes as you play with it.
The play area has a light bulb circuit, and a moveable bar magnet. There are controls that change what is connected to the circuit, flip the bar magnet North and South poles, and reset the sim.
Move the magnet to play.
Play Area (h2)
Light Bulb Circuit (h3)
(If single just 4 loop coil attached) The
In circuit are a light bulb circuit has a and 4 loop coil connected. The coil is open on the left and right , allowing - the bar magnet to can pass through.
(If both coils) The light bulb circuit has a 2 loop and 4 loop coil connected. Both 2 loop or volt meter attached)
In circuit, are a:
- 4 loop coil
- 2 loop coil (if enabled)
- Volt meter (if enabled)
The coils are open on the left and right , allowing - the bar magnet to pass through.
(If volt meter showing) A volt meter attached is attached to the circuit.
(If field lines visible and single coil) Checkbox: Connect volt meter to circuit
- Checkbox: Show field
- Checkbox: Add 2 loop coil to circuit
Field Lines (h3)
(If just 4 loop coil attached)
From the magnet's position, a[field strength]
magnetic field is passing through the 4 loop coil.
(If field lines visible with DIFFERENT intensities, and both coils showing) From the magnet's position, a2 loop coil attached)
The magnet field strength is:
[field strength]
- at the 4 loop coil
- .
[field strength]
- at the 2 loop coil.
Magnet (
If field lines visible with SAME intensities, and both coils showing) From the magnet's position,a[field strength]
magnetic field is passing through both the 4 loop coil, and the 2 loop coil.- Checkbox: Connect volt meter to circuit
- Checkbox: Show field
- Checkbox: Add 2 loop coil to circuit
Magnet (h3h3)
(If just 4 loop coil attached)
The bar magnet is at the [ location ]
of the Play Area.
(If 2 loop coil attached)
The bar magnet is at the :
[ location ]
of the Play Area[proximity]
to the 4 loop coil.[proximity]
to the 2 loop coil.- North on the
[left / right]
- South on the
[right / left]
. - Magnetic field lines go
(If single coil) The magnet is [proximity]
to the 4 loop coil.
(if both coils showing, and DIFFERENT proximity values) The magnet is [ proximity ]
to the 4-loop coil, and is [ proximity ]
to the 2-loop coil.
(if both coils showing, and SAME proximity values) The magnet is [ proximity ]
to the 4-loop and the 2-loop coils.
(if field lines hidden) The magnet has two magnetic poles: North on the [left / right]
, South on the [right / left]
.
(if field lines visible) The magnetic field lines are going from North pole on [left / right]
end, to South pole on [right / left]
end of magnet.
Button: flip magnet (Help text: "Flip North and South poles")