Overview
By default, when a user begins a new book, the capture mode is set to manual.
Capture
Storycard x: Manual capture
- Clicking on the large target area triggers capture from the two cameras, ideally simultaneously, or if not, in quick succession
- Immediately after clicking, and for the duration of the capture, "Click to capture" should be replaced by "Capturing. One moment please..." and an indeterminate progress indicator
- Upon successful capture, the target area should "blink" to visually indicate a successful capture
- Following the "blink", the capture interface should return back to its waiting state (the initial state)
Storycard x: Switch between manual and automatic capture
- In manual (default) capture mode, clicking on the automatic capture button OR "Switch to auto capture" link switches to automatic capture mode in a stopped/paused state
- Additionally, the pressed/depressed button state for manual-capture swaps, and "Switch to auto capture" link switches to "Switch to manual capture"
- In automatic capture mode, clicking on the manual capture button OR "Switch to manual capture" link switches to manual capture mode in a waiting state
- Additionally, the pressed/depressed button state for manual-capture swaps, and "Switch to manual capture" link switches to "Switch to auto capture"
Storycard x: Automatic capture
- When entering the automatic capture, the default state should be stopped/paused
- While in the stopped/paused state, the user can change the capture interval (by default, 6 seconds)
- The field for the interval should accept numbers only
- Upon submitting the capture interval value, a check against the minimum value (how do we come up with this value?) should be executed
- If the submitted capture interval value is smaller than the minimum value, an error is displayed, and the "Start automatic capture" interaction is disabled until a valid value is entered
- Capture interval value should persist for the duration of the session
- When automatic capture is activated:
- The only interaction possible is stopping/pausing automatic capture--all other UI elements should be disabled
- A determinate progress indicator shows the time left before next capture
- The capture interval time should be from end of capture to start of new capture (i.e., capturing time is not included) (this is subject to change)
Storycard x: Unsuccessful capture
- On an unsuccessful capture (i.e., POST returns an error), an appropriate error message should appear (e.g., one of the cameras was disconnected) with the option of attempting capture again
Review
Storycard x: Split view
Storycard x: Grid view
- The grid view should look and behave the same as the thumbnail pane in split view, except in a grid (vs. linear) layout
- Thumbnails remain the same size as they were in the split view
- Selecting the capture "thumbnail" has no effect. Double-clicking on it should switch the interface to split view in capture mode.
Storycard x: Unprocessed review
Processed review
...
Storycard x: Adjusting content bounding boxes
...
Storycard x: Applying content bounding boxes to following pages
...
Storycard x: Setting as single page or page spread
...