Alerts
Movement Alerts
Magnet Focus Alert (First time focusing)
- "Magnet at
[location]of the Play Area. (If first time focusing magnet) Use the W A S D keys to move the magnet. Number 1, 2, or 3 keys to slide the magnet."
Magnet Focus Alert (after first time focusing)
- "Magnet at
[location]of the Play Area."
Movement Alert
- "
[step direction]"
Movement Alert: direction or step size change
- "A
[ step size ]step[step direction ]."
Slide start alert: on release of 1, 2, or 3 key press
- "Sliding magnet
[slide speed]to[slide direction]side of play area. Press Space to stop slide."
slide Slide stop alert: Space bar is pressed, bumped into a coil or reached edge of play area
- "Sliding stopped."
sliding Sliding in progress
- "Sliding to
[slide direction]." 
Alert Frequency: This is a lower priority alert. If one of the other alerts / events has occurred it is not be necessary to give this movement alert.
Coil bump alert
- "Bumped into
[number coils]coil."
Location Alerts
Location change alert: magnet transitions from one location region into another
- "At
[location]of play area."
Coil proximity change alert: magnet transitions from one coil proximity region into another
- Single coil: "
[coil proximity]4-loop coil." - Both coils: "
[coil proximity]4-loop coil.[coil proximity]2-loop coil." - Alert Frequency: This alert is omitted if the user's action will trigger an Entrance Direction or Exiting Coil alert.
Coil proximity change event with magnetic field enabled
- Single coil: "
[coil proximity]4-loop coil and[field strength]magnetic field passing through." - Both coils: "
[coil proximity]4-loop coil and[field strength]magnetic field passing through.[coil proximity]2-loop coil and[field strength]magnetic field passing through." - Alert Frequency: This alert is omitted if the user's action will trigger an Entrance Direction or Exiting Coil alert.
Coil Entrance Direction Alert
- "
[number coils]coil entrance to the[left / right]." - "
[number coils]coil entrance no longer to the[left / right]." - Alert Frequency: this alert should occur only once and during the transition into the region.
Exiting Coil Alert
- "Exiting
[number coils]coil."
Sim Controls Alerts
Volt meter: adding / removing
- Adding Volt Meter: "Connecting volt meter to circuit"
- Removing Volt meteter: "Removing volt meter from circuit"
Magnetic field: show / hide
- Showing field lines single coil: "Showing magnetic field lines.
[field strength]magnetic field passing through 4 loop coil." - Showing field lines both coils: "Showing magnetic field lines.
[field strength]magnetic field passing through 4 loop coil.[field strength]magnetic field passing through 2 loop coil." - Hiding field lines: "Hiding magnetic field lines.
2 loop coil: show / hide
- Adding 2-loop coil: "Adding 2 loop coil to circuit."
- Removing 2 loop coil: "Removing 2 loop coil from circuit."
Rotate magnet
- "Flipping magnet: North pole is now on
['left' / 'right']. South pole now on['right' / 'left']."
Rotate magnet: with visible field lines
- "Flipping magnet and its magnetic field: North pole is now on
['left' / 'right']. South pole now on['right' / 'left']." - Remark: This is the same description as a regular "Rotate Magnet" alert text with the addition of "and its magnetic field".
Alert Descriptor Values
coil proximity:
- Far from
- Close to
- Very close to
- In
field strength:
- Very strong
- Strong
- Weak
- Very weak
- Minimal
slide direction:
- left
- right
slide speed:
- slowly (1 key pressed)
- normally (2 key pressed)
- quickly (3 key pressed)
location:
- top-left
- top-center
- top-right
- middle-left
- middle-right
- center
- bottom-left
- bottom-center
- bottom-right
- +edge if at edge
number coils:
- 2 loop
- 4 loop
step direction:
- left
- right
- up
- down
step size:
- regular (default)
- large (if CTRL modifier pressed)
- small (if Shift modifier pressed)
Faraday's Law (h1)
Scene Summary (h2)
Simulation Play Area contains:Faraday's Law is an interactive sim. It changes as you play with it.
(If single coil)
The play area has a light bulb circuit with a
4 loop coil.a magnet located at the[location] of the Play Area, [proximity] to the 4 loop coil.
(If both coils)
The play area has a light bulb circuit with a 2 loop coil and a 4 loop coil.
There is a moveable bar magnet
located at the[location] of the Play Area, [proximity] to the 4 loop coil, and [proximity] to the 2 loop coilin the Play Area. The circuit has checkboxes that change what is connected to it. There is also a button to flip the bar magnet and reset the sim.
Move the magnet to play.
Play Area (h2)
Light Bulb Circuit (h3)
The lightbulb circuit has the following parts connected together with wires:
(If single coil) The light bulb circuit has a 4 loop coil connected. The coil is open on the left and right, allowing the bar magnet to pass through.
(If both coils) The light bulb circuit has a 2 loop and 4 loop
coilsThe coils coil connected. Both coils are open on the left and right, allowing the bar magnet to pass through.
(If volt meter showing) A volt meter attached is also attached to the circuit.
(If field lines visible and single coil) From the magnet's position, a[field strength] magnetic field is passing through the 4 loop coil.
(If field lines visible and both coils) From the magnet's position, a[field strength] magnetic field is passing through the 4 loop coil, and a [field strength] magnetic field is passing through the 2 loop coil.
- Checkbox: Connect volt meter to circuit
- Checkbox: Show field
- Checkbox: Add 2 loop coil to circuit
Magnet (h3)
The bar magnet is at the [ location ] of the Play Area.
(If single coil) The magnet is [proximity] to the 4 loop coil.
(if both coils) The magnet is [ proximity ] to the 4-loop coil, and is [ proximity ] to the 2-loop coil.
(if field lines hidden) The magnet has two magnetic poles: North on the [left / right], South on the [right / left].
(if field lines visible) The magnetic field lines are going from North pole on [left / right] end, to South pole on [right / left] end of magnet.
Button: flip magnetic polesmagnet