Document to record notes about the hardware design of Decapod
Computer System
User to use their own configuration if available.
If mobility is a use case, then we will have a recommended and minimum hardware configuration:
- Dual-Core CPU, Quad-core ideal for lots of remastering work
- 4GB RAM
- Capable of running Ubuntu 9.x
- 3 USB ports (can use a hub)
- About 10GB per book. Recommend 200GB HDD or a 32GB flash drive.
Camera Mounts and Accessories
Rather than come up with a prescriptive list of tripods, we should give a short guide in making a proper selection based on our minimum requirements.
Tripod Head Requirements:
- 3/8" head plate thread size (for support of Manfrotto 131DD double-head bar)
Tripod Legs Requirements:
- 5 lb. load capacity (capable of holding 2 cameras simultaneously)
- Tripod plate thread size should match the tripod thread size of the tripod head selected (i.e. if tripod head has a 1/4" tripod thread, then the tripod legs must be 1/4" too).
- Reasonably compact (~20") to fit into briefcase, large bag, etc.
Double Camera Mount
Since the Manfrotto 131DD is the mounting bar we are using for the cameras, this restricts the choice of tripods to those with 3/8" threads.
- Tripods with heads are typically 1/4" (which are not compatible with the 131DD), but there are a few with 3/8". Careful research must be taken to find these tripods.
- Tripod legs (without heads) are typically 3/8" which is compatible with the 131DD. However using just the legs without a head may be inconvenient to use for tilt/pan adjustments.
Tripod Heads with 3/8" threads
- Manfrotto 486 / 488 Ball Head
- Manfrotto 468MGRC4 / 468MG
Notes:
- the above tripod heads have a 3/8" male thread at top to mount the Manfrotto 131DD.
- the above tripod heads have 3/8" female tripod mount at base. Therefore selection of tripod legs needs to have a male 3/8" head mount.
Tripod Legs
- Induro A013 Alloy (20.2" folded, 5.5 lb. load, weight 2.7 lb.)
- Induro A014 Alloy (18" folded, 5.5 lb. load, weight 2.4 lb.)
- Manfrotto 190XDB (21.1" folded, 11 lb. load, weight 3.5 lb.)
*Note the above tripod legs have 3/8" tripod head mount thread size.
ATRC's Selection
- Manfrotto 131DD double head arm
- Manfrotto 486 tripod head with 3/8" mounts
- Manfrotto 190XDB
Other Double Camera Mounts (not recommended)
Cradle Design
- Gaylord Library supply has a selection of cradles. http://www.gaylord.com/
Alternative Input Devices
Foot Pedals
- Fentek USB pedal with keyboard emulation: http://www.fentek-ind.com/FootPedal.htm#afs1usb
- X-Keys Foot Pedal: http://www.xkeys.com/xkeys/xkfoot.php (Generic product name is "Infinity" foot pedal)
- Logitech Wingman Wheel and pedal http://www.logitech.com/index.cfm/gaming/pc_gaming/wheels/devices/320&cl=ca,en (may not be open or programmable)
- PedalPax pedal. Small and cheaper. http://www.pedalpax.com/Pedalpax_Foot_Pedal_Products.htm
Foot Pedal Software
- Linux pseudo-driver for X-Keys foot pedal: http://code.google.com/p/footpedal/ (GPL-3)
- Using Pedable and AutoHotkey allows for mapping Inifity pedals to emulate keystrokes: http://www.autohotkey.com/forum/topic29157.html
Basic Large Switches
- Large USB button: http://www.enablemart.com/Catalog/General-Switches/Buddy-Buttons
Switch Circuits
Circuit boards for wiring basic switches as a keyboard: